How does a solar powered lawn mower work

When the sun rises or sets, a porch or lawn with a garden is a pleasant place to relax and take in the scenery. If you don’t have the correct equipment, upkeep might turn into an executioner without the right lawnmower.
Because a lawnmower can be rather hefty, there is no need to spend your summer months re-signing up for a gym membership when your lawnmower can provide all the exercises you need!
Manual lawnmowers and electronic lawnmowers are two options for lugging a hefty gas-guzzling lawnmower about. However, the solar-powered lawn mower appears to be the new inventive kid on the block. This machine is powered by free energy, but it is also completely self-sufficient. Isn’t it just as easy as you’d expect?
Solar-powered lawn mowers, on the other hand, often use solar energy as their primary power source. It’s possible for them to be very different in structure and energy use. Solar-powered lawn mowers can be found in a variety of different forms, including those that are both partly and totally powered by the sun.
Electronic lawn mowers powered by solar panels are easier to use in the field. The safety and convenience of a solar-powered lawn mower stem from the fact that there is no hazardous gas or oil to deal with while filling it up.
It also eliminates the need to visit the petrol station for refueling, which is a nuisance. When the lawnmower is not in use, simply connect it to the amazing charging station and it will begin charging!
There are no harmful effects on your health or the environment because there are no combustion releases from inside the vehicle.

How does a lawnmower that is powered by solar energy function?

Advantages of Using a Lawnmower That Is Powered by the Sun
The use of solar-powered lawn mowers comes with a number of additional benefits.
Advice Available on the Market for Converting a Gasoline-Powered Lawn Mower into a Solar-Powered Lawn Mower
Structure of a Solar-Powered Lawnmower Components
1. Cutter
2. Chassis
3. Node MCU
4. Motor Regulator Unit
Husqvarna Solar Powered Lawn Mower
Final thoughts

How does a lawnmower that is powered by solar energy function?

Lawn mowers are typically powered by engines that run on either fuel or oil. On the other hand, this does not occur when using a lawnmower that is powered by solar energy. The electronic motor is a common component found in this piece of equipment.
In addition to that, this electric motor may function from the battery with the minor volts. In addition, the solar panel will charge this battery, and the photovoltaic effect, which converts the solar energy that has been captured into electrical energy, will also be at work.
This is the standard operating procedure for more solar-powered equipment such as solar-driven refrigerators, solar-powered air conditioners, solar-driven flashlights, or solar-powered fans. In addition, a solar-powered lawn mower’s battery can be charged even when it’s not being used if it’s connected to a high-quality power source that has a solar panel. This provides the power necessary for the operator to continue with their planned activities. Your solar-powered lawn mower will have plenty of time to charge up completely before its next use because you intend to cut your grass multiple times a week.

Advantages of Using a Lawnmower That Is Powered by the Sun

A solar-powered lawnmower is an additional option to keep your lawn looking nice and is convenient without incurring any additional costs, with the exception of the initial investment. It won’t be necessary for you to add any more oil or fuel to your lawnmower in order for it to be able to cut the grass on the outside area of your property.

You will save a lot of money this way on repeated fill-ups. Solar energy is both widely available and cost-free; as a result, you are free to make as much use of it as you require without incurring any additional costs. In addition, you will not be subject to any repeated price increases.
A solar-powered lawnmower won’t hurt your health in any way, so consider getting one. There will be no further dangerous leaks or gas smells. Therefore, now even your children may assist you in making your grassland appear lovely, and there is no question that this will be beneficial to their health.

The use of solar-powered lawn mowers comes with a number of additional benefits.

If you want to win over the hearts and minds of your customers, choose a solar-powered lawnmower over one of the other options available. These days, consumers are getting more environmentally conscious with each passing year. It’s impossible not to have a positive outlook on things like biodegradable activities and green gears that run with, as they don’t harm the regular atmosphere in any way.
Lawnmowers that are powered by sunlight, as opposed to mowers that are powered by luxurious fossil fuels or by the mains voltage, result in significant cost savings, which can be enjoyed.
Every user who is concerned of their impact on the environment has access, all year round, to a source of power that is completely free: the sun.

1. Cutter

The cutter is the primary mechanism that is responsible for cutting the grass. The cutting deck of the solar-powered lawnmower is where it will be hooked to the device. The cutter is made up of two parts, which are referred to as the base and the upper cutter respectively. During the cutting process, the bottom cutter, also known as the base, will grasp the grass in a manner analogous to that of a comb and will grip it in a straight position.
Additionally, holding it does one more function that helps facilitate the cutting process. The motor has been attached to the base cutter so that it can assist in countering the sideways movement of the higher cutter. After that, the cutter will remain in place atop the base cutter, and the connection between the three of them is quite smooth.
By modifying the design, the amount of resistance that exists between these upper and lower cutters is kept to a minimum. In addition, the design of the upper and lower cutters is appropriately analogous in form to the holes that are produced by milling. The opening will be in the shape of a quadrilateral and will provide coverage of approximately 5mm.
In addition, the slits are located along the length of the razor blade, and the studs are given to the chassis in order to hold the cutter. On the other hand, the lower base is fastened to the chassis, and the higher base is installed on the lower base using pivot type joints, which only allow the higher blade a single degree of freedom. Together, these two bases make up the higher blade.
In addition, the cutter may also operate as a pair of scissors, which is logical given that our families taught us to cut the grass by first grabbing it and then trimming it in the same manner. The cutter can accomplish both of these functions simultaneously. In addition, the lower cutter is responsible for grabbing the grass, while the higher cutter is responsible for slicing it.
At that moment, it cuts through the grass with an extraordinary degree of precision. When using rotational cutters, the cutter cannot cut the grass evenly since it will bend the grass as it rotates. As a result, the cutting becomes ineffective as a result of this design flaw.
With this particular lawn trimmer, the problem has been fixed, and the base of the trimmer now has a mechanism that grabs the grass and cuts it. The power of the lawn that needs to be cut will guide the decision-making process for the lawn cutter material to use.
There are several different kinds of grass, each of which has its own distinct tensile and adjacent strength. These restrictions are based on the natural circumstances that exist in that particular place; hence, the material must be able to tolerate each variety of grass.
Thermosetting polymers are an option for us when working with polymers. When it comes to the metals, we use aluminum brasses and bronzes to prevent deterioration because copper and iron are susceptible to the problem of deterioration due to the fact that dew droplets can be found on the grass, the lawn itself discharges liquids during the cutting process, and the mower has to operate in daylight environments. This is because the dew droplets can be found on the grass, and the lawn itself discharges liquids during the cutting process.
Aluminum and thermosetting polymers are two potential options for the cutter that would be great for preventing deterioration in environments with high levels of sunlight.

2. Chassis

The majority of the components that make up the chassis are frames and parts that are analogous to the solar panel, rolls, battery, motors, etc. In most cases, the framework is constructed by utilizing thick pipes made of a lightweight material. It will provide shelter for the battery as well as gather the grass that has been trimmed down.
In order to collect energy from the sun, a solar panel is fastened to the top of the framework. The chassis is divided into two compartments: one for the batteries, and the other for the grass that has been collected. The stress deliberation has been well dispersed in order to bring loads of additional constituents and the grass that has been harvested.
In addition, the positioning of the wheels ensures that the load is distributed evenly throughout the platform. The chassis has apparatus that may change the height of the cutter, allowing for beautiful cutting or slicing in the desired manner.

3. Node MCU

This component is an open-source IoT-centered platform that activates the esp8266 wifi SoC beginning with the Espressif unit. Additionally, the hardware relies on the ESP-12 part to function properly. This is the defaults firmware, which provides access to somewhere in the neighborhood of 12 GPIO pins.
Aside from that, the connections can be finished using these pins, and 3.7V is sufficient power for this. In addition, the Vcc pin can serve as a source of feedback for the system. In addition, the program is loaded onto the board using the drafting software known as Arduino IDE, and the connection is made via a micro-USB cable.

4. Motor Regulator Unit

This component is able to monitor a large number of motors simultaneously while also delivering alternating splits. This is accomplished with the assistance of a setup involving surrounding dual H bonds. It gives the motors the vital input command that they need.
In the same vein, it provides power feedback to firmware in a manner comparable to that of Arduino and Node MCU. In addition, it is able to accept feedbacks in the range of 3V-35V and produce a 5V power source for the Node MCU up to the current maximum of 2A.

Solar-powered lawn mower manufactured by Husqvarna

Are you sick of repositioning your lawnmower all the time? Do you prefer to spend your weekends relaxing about rather than working in front of a noisy, stinky equipment while it’s baking in the hot summer sun? In addition, Husqvarna may have the solution you’re looking for; unfortunately, this alternative does not come cheap.
The absence of any radiation The Husqvarna Solar Powered Robotic Lawn Mower is the first fully robotic lawn mower on the market that is also powered in part by the sun’s rays. It is available for purchase worldwide. The Automower Solar Hybrid has a large combination solar panel, in addition to a charging station for mains-driven recharging so that it may be used for refreshing.
When daylight is available, the solar cells enable the mower to extend the amount of time it can spend cutting grass before the battery needs to be replaced. The battery that is used in the lawnmower is a NiMH product that has 2.2 ampere hours and operates at 18 volts.
In addition to this, it is designed to function with the least amount of human touch possible and to manage grass areas that are equivalent to a half acre. Following the formation of a perimeter around the area to be cut by a collection of controller wires that serve as a guide for the Automower Solar Hybrid, cutting is carried out inside the designated area. If it must face an obstacle while operating within the perimeter, it will turn around and readjust its course.
In addition, once fully charged, this gadget may perform its trimming function for a considerable amount of time before it needs to be refreshed. The device weighs around 10 kilograms and produces a sound level of about 61 intensities, which is far lower than a lawnmower that is powered by gasoline.
In addition, you don’t need to worry about retrieving it from the middle of the grass once the batteries begin to run low because this Automower Solar Hybrid can make its way back to the charging position and charge itself whenever it needs to, even when you are outside using it. This eliminates the need to worry about retrieving it from the middle of the grass.
As was discovered, the market does not provide access to this kind of technology at a price that is more reasonable. It comes to almost four thousand Australian Dollars.

Conclusions and musings

As a result of the variable blade design, the solar-powered lawnmower is capable of cutting the grass with a high degree of precision. This particular kind of lawnmower consumes less electricity than others because of design optimizations. When it comes to vast lawns, an effective and lucrative use of a lawnmower is possible.

See more : electricproductsreview

Monitor Screen Size Comparison (Detailed Guide With Chart) (Detailed Guide With Chart)

Have you ever paid mind to the monitor screen size comparison? Probably not, nevertheless this is the very parameter that plays a major role in the best purchase of the display screen.

It is pretty much clear to choose up a bad gaming monitor if you are ignorant of the actual screen size and its comparison. Besides, getting confused on the aspect ratio and monitor inner operation becomes the following factor that ultimately leads you to the compromised screen display.

The size and measurement in display measurement relies on the manufacturing place substantially. For instance, the 14’’ inches of a display in the US would be 13.3’’ inches in Asia. For instance, the 14’’ inches of a display in the US would be 13.3’’ inches in Asia.

However, below we are covering the much more extensive insights. Today’s article has been especially dedicated to the screen size to let you know how various display charts add to the aesthetics and graphics.

Before buying you need to make sure the original build of the device, every region makes things correspondingly!

Comparison Between 24’’ Inches and 27’’ Monitor Screen

when it comes to what size monitor folks should be using. Some argue that a 24-inch monitor is the right size for most individuals, while others insist that a 27-inch monitor is best for working on major projects. Today we will be taking a look at the benefits and downsides of each sizes to help you determine what’s best for you. Here is a comparison between 24 inches and 27 inch monitors.

1.Dimensional comparison

The size of the monitor overall, and the displayed screen are two different things. Certainly, you do not count that bezel while witnessing the image or video playing in front of your sight. Besides, the inches you count while measuring the screen are always diagonal in length and not vertical or horizontal.

Placing the two monitors (24’’ inches and 27’’ inches) beside one other and playing in front of each other will clarify to you the exact measurement, that is, 7.5cm in total. For example:

Monitor

Diagonal Vertical Horizontal
24 Inches Monitor 60.96 cm 53.1 cm wide 53.1 cm wide
27 Inches Monitor 68.58 cm 59.8 cm wide 59.8 cm wide
Dimensional Difference in cm 7.62 cm 6.7 cm 6.7 cm
Dimensional Difference in % 12.5% 12.6%

12.6%

2.Distance for viewing comparison

When making comparisons, the distance between the monitor and the screen is critical. The optimal viewing distance for each monitor is listed on the monitor itself. In order to see the exact images you want, you need a good point of view.

The suggested easy-to-read distance for a 24-inch display is 50cm to 60cm, whereas the recommended distance for a 27-inch display is 60cm to 70cm. Furthermore, the recommended distance for a 29-inch display is 70cm 80cm, while for a 32-inch display it is 80cm 90cm. After all, the most important thing is to have a pleasant view!

3.Comparison of picture quality

The pixel choppiness is still evident on a 27-inch panel, even though the 24-inch monitor has FHD results.

The higher the screen size difference, the more obvious the difference in image quality will be, like in the case of a 24 and 32-inch monitor. There is less of an impact on the visual quality between the 24″ and 27″ screens as compared to earlier models.

4.Fitting comparison

The installment is yet another noteworthy comparison. A 27-inch monitor’s _wide area_ makes it difficult to set up a 24″ display monitor. Stunts go bigger to make up for the disparity in size, and this has an effect on the overall space.

Differentiating Between Monitor Displays Using a Single Statistic

24 inches Monitor

  • Diagonal Length in cm: 60.96 cm
  • Horizontal Length in cm: 53.1 cm Wide
  • Vertical Length in cm: 29.9 cm Long
  • Distance to Easy-to-Read Monitor: 50cm ~ 60cm
  • Installation: easy and user-friendly

27 inches Monitor

  • Diagonal Length in cm: 68.58 cm
  • Horizontal Length in cm: 59.8 cm Wide
  • Vertical Length in cm: 33.6 Long
  • Distance to Easy-to-Read Monitor: 60cm ~70cm
  • Installation: Rather intricate for space issue
  • Installation: Rather intricate for space issue

Is it Possible to Bake a Cake in the Microwave?

Bake a Cake in the Microwave

Microwave grill and microwave solo are not suitable for baking. The size of the baking tray or baking tin that may be used within the microwave oven is limited by the rotation of the glass tray inside the chamber. Another downside of using a microwave oven for baking is that single-level baking is not possible.

Is it possible to bake a cake in the microwave without using the convection setting?

You can still prepare a cake in a regular microwave if you don’t have a convection microwave. Simply bake the cake in a microwave-safe glass dish on the rotating plate. In a standard oven, a cake takes just 5- 7 minutes to bake.

Can I bake with a Solo microwave?

A single microwave oven is a simpler version of a microwave oven. It’s wonderful for reheating, cooking, and defrosting uniformly, but it can’t grill or bake. A solitary microwave oven can provide for most people’s basic microwave requirements, but it lacks unique capabilities. In a single microwave, you can only use microwave-safe glass or plastic. What is the finest microwave oven for baking cakes?

Baking, toasting, and grilling are the finest uses for an OTG. You can easily make cakes, grill meat, and toast bread. All of these capabilities are available in a convection microwave, as well as the ability to reheat, cook, and defrost, which the OTG lacks.

Is it possible to make pizza in a single microwave oven?

It’s fantastic for cooking, but it won’t let you grill or bake with it. A solitary microwave oven may be used for basic microwave requirements, but it lacks unique capabilities and can only be used with glass or plastic.

What temperature should I bake a cake at?

The majority of cakes should be baked at 350 degrees Fahrenheit. To make a flat-topped cake, just reduce the temperature to 325 degrees.

Related:

How long does a cake take in the microwave?

Cook the cake for 3-4 minutes on high in the microwave. In the microwave, the cake will bubble and puff much as it would in the oven. It’s done just as it begins to set (it’ll still be jiggly). Stick a toothpick straight down into the middle of the cake to test whether it’s cooked. Is it possible to bake a cake in a glass dish in the microwave?

It’s versatile, since it can be used in a microwave, dishwasher, oven, freezer, and refrigerator. This glass cake plate is 100 percent food grade, unlike plastic containers, which may leach toxic chemicals into your food if used frequently.

Which oven is ideal for making cakes?

For baking cakes and cookies, we recommend the following oven: Panasonic FlashXpress Compact Toaster Oven Panasonic FlashXpress Compact Toaster Oven Panasonic FlashXpress Compact Toaster Oven Mini Smart Oven by Breville (BOV450XL). BLACK+DECKER Convection Toaster Oven (CTO6335S). TSSTTVDGXL-SHP Digital Convection Oven by Oster. Countertop Toaster Oven by Hamilton Beach TOB-135N 157 Deluxe Convection Toaster Oven by Cuisinart

Should I use convection to bake a cake?

In a convection oven, what temperature do you bake a cake at? Convection ovens are typically not recommended for baking cakes, according to food experts. Cakes rise best when they are kept at a constant temperature; heat movement changes the crumb of the cake, which might cause it not to rise correctly.

Is it possible to bake in the microwave?

Yes, to put it simply. Yes, you can bake using a microwave oven.

What is the best way to begin baking a cake in the oven?

You want indirect heat while baking a cake. Preheat your oven (possibly a few degrees higher than the recipe specifies) and let the elements to get the oven to that temperature. Then immediately open the oven door and set the cake inside, then shut the door and reduce the heat to the desired level.

Is it possible to produce pizza with a single oven?

In a single microwave oven, we cannot bake or grill meals. In the microwave oven category, solo microwave ovens are the most basic or entry level devices. Microwaves are produced by a single magnetron. They’re great for bachelors or a two-person household.

What is a microwave grill?

The time it takes to cook meats and breads is reduced when using a microwave with a grill mode. The microwave grill mode enables you to sear and cook meat at the same time without losing taste or breaking down the attractive structure of the meat, crust, or breaded outer layer.

A convection oven uses a fan and exhaust system to circulate hot air throughout the oven chamber, minimizing hot and cold spots and allowing meals on all racks to cook more evenly. A third heating element, known as genuine convection, may be added to convection ovens to help meals cook quicker.

If you need more information, please see here!

How to set up a sound bar with your TV

How to set up a sound bar with your TV

We show you how to connect your sound bar to your TV and obtain the finest sound quality possible, regardless of what you’re watching.

Sound bars, like any other speaker system, benefit from a little more time and attention when they’re first set up. Use our simple tutorial to learn how to obtain the highest-quality audio from yours. To get started, simply follow these six simple steps. We also explain what the various connections entail so you can choose the best one for your setup, as well as walk you through the necessary TV updates. Sound bars aren’t just for listening to music from your phone, tablet, or laptop; they can also be used to listen to music from your phone, tablet, or laptop. We’ll show you how to do it. We’ll show you how to set up your sound bar, but you’ll also want to make sure your television is in good shape. To view your TV’s perfect picture setting, use our free tool – go to how to get the greatest TV picture. If you’re having troubles with your sound bar, have a look at our professional guide to common sound bar issues.

How to put your sound bar together

For the greatest effects, set your sound bar right in front of your TV and watch it straight on. If space allows, place both on a flat surface, such as your TV stand. You may mount the sound bar to the wall to conserve room, but you’ll need a separate bracket.

Subwoofer

A cable connection may be required if your sound bar contains an external subwoofer. Others are wireless and can be placed anywhere, although they should be within 10 meters of the sound bar in most cases. Make sure it isn’t too close to a wall, as this will cause boomy bass. As long as it doesn’t generate distracting vibrations, you can put it inside your TV cabinet.

 

Keep it in the middle.

Your sound bar should, in my opinion, have equal space on the left and right corners so that sound may disperse evenly around the room. This allows for a more balanced and immersive experience by allowing sound to reflect more equally towards your TV viewing location.

Height of the sound bar

When you’re sitting in your typical TV viewing position, aim for it to be within a foot of the height of your ears. Because of this, sound bars that are wall mounted sound better.

The distance between you and the sound bar

The appropriate distance between you and the sound bar varies depending on its power and whether or not it has surround-sound capabilities. Check the manufacturer’s recommendations in the manual.

Finding the sweet spot

A decent sound bar will sound wonderful no matter where you sit. Some, on the other hand, have a pretty narrow’sweet spot.’ Audio quality degrades outside of this, so attempt to set up your space so that all TV watchers get the best audio quality possible. To place you in the midst of the action, Dolby Atmos uses upward-firing speakers that bounce sound off the ceiling. If your sound bar supports it, use the instruction menu to customize it for the shape and size of your room.

Furniture

To reflect the sounds to your ears, you’ll have walls to the left and right of the sound bar. Carpets and curtains, as well as other soft furnishings, will aid to improve sound quality. If you try to hide your sound bar in your TV cabinet, it will sound boxed in and you won’t get the most out of it. Are you looking for a sound bar that will look great in your living room? Discover the sound bars from Best Buy that are both stylish and functional.

How to connect a sound bar in the best possible method

Even if you set up your space to perfection, you’ll still miss the most critical step: choosing the correct connection. We look at your primary options to help you figure out which one is ideal for you.

Analogue input is a type of input that is not digital.

These once-common red and white cables are rarely seen as a major input for sound bars these days. Connecting analogue cables is as simple as connecting the colored connectors into the appropriate port. This cable type isn’t compatible with many contemporary sound bars, and we’ve noticed several newer TVs without it as well. It may be time to upgrade if you’re still using analogue connections. To pick a model that’s suitable for you, look through our Best Buy TVs.

Analog input

Almost every sound bar has a digital input, whether it’s digital coaxial or digital optical. Most TVs have one or both of these outputs, so you’ll have no trouble connecting yours to your sound bar. These cables are capable of carrying high-quality stereo signals, but they aren’t ideal for surround sound.

HDMI

HDMI input/output connections are becoming more popular as a way to connect your sound bar to your television. Although most new sound bars come with HDMI connectors, it’s important double-checking before purchasing. HDMI cables may carry more data than optical cables, allowing higher-quality sound codecs like Dolby Atmos and DTS:X surround sound to be used.

CEC HDMI

Consumer electronics control (CEC) is supported by the majority of HDMI ports. This enables you to operate additional CEC-enabled devices, such as your TV’s volume and power, with just one remote. Although many manufacturers claim that their TVs will only connect to AV equipment from the same brand, fundamental CEC functionality normally works across brands – just make sure HDMI CEC is turned on.

ARC HDMI

This convenient function allows you to connect HDMI-compatible devices. You can connect your Blu-ray player or console to the sound bar, for example, so that just one cable is needed to connect to your TV and serves as both input and output. Most contemporary TVs have a clearly defined ARC or eARC plug, therefore this feature won’t operate through every HDMI port.

If you don’t have HDMI ARC on your TV or sound bar (you’ll need it on both to use it), the next best alternative is to use one of the other digital connections, such as digital optical or digital coaxial. Check which one your TV has (it may have both) and pick a sound bar that complements it. You can select models with the connections you want by using the filters on our sound bar reviews.

Set the volume of your sound.

Choose to output sound to an external speaker system from the TV menu. If you don’t do this, your sound will continue to come through the TV speakers or you won’t hear anything at all.

Double-check your HDMI cable.

The sound bar may be listed using the manufacturer’s HDMI name if you’re using an HDMI connection. Keep an eye out for: LG Simplink Viera Link by Panasonic EasyLink by Philips Samsung Anynet+ Sync Sony Bravia

Make sure CEC mode is turned on.

This will allow you to control the volume of the sound bar using your TV remote.

Change the volume.

Because every area has its own shape, layout, and furnishings, which all affect the sound, you may need to adjust the delay and volume levels.

Change the subwoofer volume

This is to ensure that it blends in nicely with the sound bar and does not overpower it. In our tests, we frequently discover that the subwoofer level is set too high by default, so we lower it.

Play about with the sound bar’s settings.

Many have a mode to process surround sound (Dolby Digital and DTS audio) found on DVD/Blu-ray soundtracks and films broadcast on television.

Play around with sound effects.

This is when the audio is electronically manipulated to generate a simulated surround-sound effect for films or music, such as ‘cinema’ or ‘3D’ for a film. Look for a ‘Stereo,’ ‘Bypass,’ ‘Off,’ ‘Standard,’ or ‘Natural’ setting. Are you still having issues with your setup? Check out our expert guide to the most frequent sound bar issues.

 

Using an app to set up a sound bar 

Smart features on sound bars allow you to adjust some settings from your smartphone or tablet. This is especially true in premium and mid-range sound bars. The level of functionality varies between brands and models. It’s a nice-to-have extra feature for some. Some settings and features are only available when you use the app, which is a mixed blessing for others. That may be great today, but when the app is no longer supported by the manufacturer, you may lose those functions (which can be as crucial as being able to balance the music to suit your area). If you want to ensure that your soundbar is future-proof, make sure that all of its capabilities are available via a good old-fashioned remote control. Sound bar applications are generally simple to set up and operate, although they may require an additional step in the setup process, such as inputting your email address and adjusting permissions. If you want a sound bar that you can put in and use straight away, a model without smart functions might be a better choice. If your sound bar is beginning to show its age, check to how to get the greatest sound bar to learn more about the features available on the most recent versions.

This feature allows you to control sound bar features such as turning it on/off and altering the volume by saying a command aloud – useful if you lose your remote. These functions are built into some models, so you won’t need to connect them to a hub device. Others will necessitate the use of additional gear, such as an Amazon Echo, Apple HomePod, or Google Nest. The setup method varies by model, but it usually requires utilizing an app to connect to your sound bar. You should be good to go after this initial setup. Check out our buying guide for the best smart speaker if you’re seeking for a compatible hub for voice commands.

Using your sound bar to listen to music

Check whether the sound bar supports 3.5mm or Bluetooth connectivity if you wish to listen to music from a laptop, smartphone, or tablet.

Bluetooth

Bluetooth connectivity is available on most new sound bars. This allows you to listen to music on your phone or laptop, for example. This is normally done in the ‘Bluetooth’ section of your device’s settings menu. It’s best if you keep the gadget close to your sound bar. It’s normally good to stay in the same house or flat, although barriers or thick walls can present problems.

Port for headphones

A 3.5mm mini-jack input, sometimes known as a headphone port, is found on many sound bars. We don’t recommend this cable for TV audio because it has the poorest sound quality and is prone to interference. It could be useful for playing music from a smartphone or other portable audio device, but you’re generally better off just using a Bluetooth connection. Many current smartphones lack headphone ports — iPhones haven’t had them since 2016, while Samsung’s flagship devices dropped the connector in 2020.

Multi-room

Many sound bars now include wi-fi connectivity, allowing them to be integrated into a multi-room music system. These usually only function with other speakers from the same brand. If you already own a Sonos multi-room speaker system, purchasing a Sonos sound bar may make more sense. For more information on the finest brands, see our guide to multi-room speakers.

 

How Does a Pop Filter Work?

Isn’t it important to know that you’re using the best equipment possible so that your voice sounds clear and smooth?

It turns out that there’s a lot more to recording your voice than just plugging in your microphone and then you’re done.

It’s important to buy a high-quality microphone as a voice artist, but there are other things that can make or break the quality of your recordings, as well.

Pop filters are one of the most important things you can have with your microphone.

What is a “pop filter,” and what is it used for?

Using pop filters to record vocals is a must if you want to get a good sound. Putting a “pop filter” between your mouth and the microphone will cut out certain sounds and frequencies that you don’t want to record.

As the name implies, pop filters are used to cut out sounds that sound like “popping” when you record your voice.

When you say or sing words with ‘P’s’ and ‘B’s’ in them, you make this popping sound. These are called plosives.

People with a lot of power in their voices can also make the microphone pop when they speak in front of it or sing into it.

The reason you should use a pop filter:

If you’re not sure if pop filters are worth the extra money and set-up time, I’ve put together a list of reasons why they’re worth it.

Pop filters stop plosive sounds from getting into the recording, which can distort the recording and make it sound bad or make it sound like a “pop.”

Pop filters also help to cut down on sibilance, which is the sound you make when you say words that start or end with “s.”

Pop filters cut out high- and low-end issues, making it easier to edit out unwanted sounds when cutting them out of the mix.

They keep the microphone dry when you speak or sing, so your microphone will last a lot longer.

How does a pop filter work, and where does it come from?

The pop filter is put in front of the microphone in different amounts depending on how loud and strong the vocalist is.

It connects to the microphone stand and is big enough to protect the whole surface area of the microphone from being scratched by it.

The small holes in the material let sound through, but they also keep things like plosive sounds, sibilance, volume pops, and moisture from the vocalist’s mouth from damaging the microphone.

It’s important to put the pop filter in the right place.

You can make a big difference in the sound of your recording by where you put the pop shield.

How powerful the person who will be using it is going to make a big difference in where the pop filter goes. In a nutshell, the farther away the pop filter is from the microphone, the more effective it will be and less noise will get through, so it’s best to put it there.

If the pop filter is far away from the microphone, your recording artist will be far away from the microphone, and this could make the sound less clear.

You might have to raise the gain, which is fine in moderation, but above a certain point, too much gain can make the sound bad.

The more you raise the gain, the more background noise there will be, which will even lessen the quality and clarity of your recording. So, you need to find the right mix of things.

As a general rule, if your vocalist is going to be quiet and soft, the pop filter should be at least two finger spaces away from the microphone (if the microphone is sitting in any form of casing the spacing should be counted from the outer casing not the microphone itself).

If the vocalist is very loud and powerful, the pop shield should be at least twice as far from the microphone as the microphone itself. This way, any plosives and/or sibilance will be able to get through.

You should play around and try different things until you find the best place for the pop filter.

Pop filters come in many different types.

You should look for mesh or metal pop filters when you decide which one is best for your needs.

Check out the pros and cons for each.

The mesh pop filter.

Pros:

mesh is the type of filter that most people use to make their music sound better.

prices are usually not too high

good for new people

small holes are very good at getting rid of plosives.

Cons:

small holes can cause high frequencies to be blocked out, which could make the overall sound worse.

very easy to break

Metal pop filter for a loud sound

Pros:

more durable than the mesh material used to make the pop filter filter mesh

Most of the time, they will have bigger holes

They also tend to be small, so they won’t feel so heavy and bulky.

Cons:

They can be fragile things that can easily be bent out of shape if they aren’t kept in the right way.

As it is made of metal, it could make a whistling sound over time.

can be pricey

When you want to make your own pop filter, this is how.

If you can’t afford to buy a pop shield, there are ways to make your own that will work, especially if you’re making demos. Whether a DIY method would be good enough for professional-quality recordings is up for debate.

All you need is a thin, hollow object that is round. You can use an empty roll of duct tape or a sewing circle. Anything that looks like this should work.

A pair of pantyhose is next. It doesn’t matter what kind as long as they have small holes. Patterned ones won’t work as well. You just need a simple pantyhose.

Cut a large piece out of the pantyhose and stretch it to cover one side of the sewing circle (or duct tape roll, for example). Then, tie it down and you’re done!

That’s all! The pantyhose should be fully stretched out so you can see all the small holes.

How does 3D sound work? The Evolution of Sound

What is 3D sound?

3D audio effects shape the sound produced by stereo speakers, surround sound speakers, or headphones to appear above, below, or behind the listener.

Sound sources can be virtually placed anywhere in 3D space.

It works like some soundbars, tricking the brain into thinking different sounds are coming from different speakers.

By definition 3D sound is a system that can place sound anywhere around a listener.

So in 3D audio, the listener’s perception of the sound creates the effect of sound coming from different directions in space.

Audio cannot be placed above or below a listener in conventional stereo.

That would require a sophisticated surround sound system. 3D audio/sound tries to fix this.

Prepare yourself for some science, but this will give you a great idea of how 3D sound works.

Consider how two ears center/contain sound. When a sound is made, a sound wave is sent to the listener’s ears.

A sound coming from the right reaches the right ear first.

The left ear signal is thus delayed. The left ear signal will also be weaker due to the head “shadowing” it.

The pinna also affects the signal (external ear). The pinna’s folds reinforce and weaken certain frequencies.

We unconsciously use time delay, amplitude difference, and tonal information to locate sounds. These are all sound localization cues.

Let’s talk about HRTFs. These track sound from a pint in space to the ear canal.

Small microphones are placed in the ear canal or on a manikin’s ear.

A loudspeaker plays a measurement signal and a microphone records it.

A PC processes the recorded signal to derive a pair of HRTF corresponding to the sound source location.

3D audio systems work by simulating natural hearing. The listener’s ears receive sound localisation cues.

Using measured HRTFs as a specification for a pair of digital audio (equalizers).

When a sound signal is processed by digital filters and listened to through headphones, the listener should hear the sound at the location specified by the HRTFs.

Binaural synthesis is the result (binaural signals are defined as the signals at the ears of a listener).

What makes 3D audio unique?

The most common audio format is stereo. Stereo records two signals. 1 left, 1 r.

Play them back through left and right speakers or headphones.

Surround sound systems add front and rear speakers, as well as a subwoofer.

Some headphones even struggle to reproduce stereo.

With speakers, your left ear will pick up sound, but your right ear will as well, albeit with a slight delay and less force.

With headphones, the left channel only reaches your left ear, and vice versa.

The illusion creates odd perceptions.

It’s like listening to music that comes from inside your head rather than from somewhere in front of you.

That’s why listening to music through headphones can sometimes be strange.

As previously stated, 3D sound/audio ensures that sound is heard more effectively and realistically.

3D Audio

3D audio is aural virtual reality. Now you can hear sound as if you were actually there.

A basketball video game’s sound would be consistent. Now you can hear coaches yelling, players trash talking, and the crowd booing.

Bullets whizzing past your ears in a combat game. When you turn your head, the sound gets stronger in the opposite direction.

3D sound benefits

Users should be able to selectively attend to audio information from 3D locations.

Like everyday filtering to focus on a single speaker in a crowded room,

It should be possible to recognize various audio information channels from various positions.

This simulates the daily experience of hearing multiple conversations at once without attending to them all.

Disadvantages of 3D audio

Some products claim to be 3D products, but upon closer inspection, the technology used can be vastly different.

Caution is advised when it comes to new technologies. Always do your homework and read reviews.

Stereo enhancement/widening systems are sometimes confused with (or marketed as) 3D sound.

These systems widen or extend the sound images that normally extend to the location of the left and right speakers, beyond the speakers.

These systems don’t place sounds behind, above, or below a listener.

Even the best 3D technologies have inherent limitations when it comes to the amount of sound you can hear.

Distinction between 3D and Surround

3D sound is the next step. Surround sound surrounds you with sound.

So, if someone approaches you from behind in a movie, the sound will come from the back speakers.

Sound comes from above and below you in 3D audio.

Can You Use Skateboard Trucks On A Longboard

Can You Use Skateboard Trucks On A Longboard?

 

When it comes to skateboarding and longboarding, many newbies are unsure of a few things.

Is it possible to utilize longboard trucks with skateboard wheels?

There is no need to utilize skateboard trucks on a longboard because they are too narrow and too small for that purpose.

Compared to longboard trucks, skateboard trucks have a far lower level of stability, and are not designed for cruising.

Skateboarding and longboarding trucks have a lot more to teach, but that’s not all.

This does not imply, however, that skateboarding trucks are ineffective.

It simply implies that, because to the disparity in size and shape, they cannot be used with longboards.

As a result, I’ve gone into great detail to make everything clear to you.

If this has piqued your interest, continue reading by scrolling down the page.

Are Skateboard Trucks And Longboard Trucks The Same?

Trucks on skateboards are substantially more compact, thin, and unstable.

Unlike longboard trucks, they are not designed for cruising.

Longboard trucks are broader, larger, and have a more stable mechanism as a result of their increased size.

For longboarding, the angle of lean (about 19-21 degrees) differs from that for skateboarding, with the former having a lower angle of lean and the latter having a higher angle of lean (approx 30-38 degrees).

They are also much more stable than skateboard trucks and feature better cruising mechanisms for longboarding.

So longboards can be utilized for a variety of maneuvers like dancing, descending hills, and so on, rather than just for getting around on two wheels.

In my opinion, skateboard trucks are mostly utilized for breaking, which some people disagree with, but they have absolutely nothing to do when it comes to cruises.

Longboards are more commonly used by skateboarders since they are better suited to breaking into objects than standard skateboards.

 

What Is The Appropriate Size For Longboard Trucks?

There is no standard length of trucks for longboards because there are so many various types of trucks being used on the decks of so many different persons.

Longboard trucks typically range in size from 7 to 8 inches.

When compared to skateboard trucks, they are unquestionably lot smaller.

As a general rule, longboard trucks can be utilized for skateboards, but they will look odd and wacky, making it impossible to perform trick-based maneuvers effectively.

Due to the fact that skateboard trucks aren’t meant for cruising boards, I advise anyone just starting out to avoid this concept.

It’s solely for stunts and breaking that skateboarding trucks are designed for.

This means that you can’t do as many tricks as you can on a skateboard if you’re using them on a longboard.

Can You Use Longboard Trucks on A Skateboard?

Because longboards and skateboards are so different, I would advise against this.

However, because of their low angle of lean, they can be used on a skateboard for breaking purposes only.

As a result, although longboard trucks can be used on a shortboard, they aren’t intended for cruising, hence the former is preferable.

 

What Is Good About Skateboard Trucks?

Skateboard trucks aren’t great for cursing, but their low angle of lean and stability make them excellent for breaking.

In order to break I would recommend using skateboards rather than longboards, and I would also recommend using a shortboard instead of a long board if you are only interested in breaking.

 

What Trucks Can You Do on A Longboard?

As long as it doesn’t make the board look out of place, you can use whatever you want on your longboard.

To begin with, the cost of skateboards and trucks is low in contrast to many other products on the market.

So, you may want to experiment with a variety of trucks in order to find the one that works best for you.

In addition, you’ll learn what works best for your riding style and whether or not they meet the bill.

This means that before moving on to longboard trucks of a more advanced nature, you should first test out some basic skateboard trucks.

 

Does Truck Size Matter In A Longboard?

The size of the trucks on a longboard is obviously quite important.

Here’s the reason:.

In longboarding, the size of a wheel is analogous to the size of a truck.

As a general rule, if you buy a truck with a diameter of 7 to 8 inches, the board will turn more quickly, and vice versa.

In addition to all this, trucks also come with different degrees of lean and lower degree trucks are way better suited for cruising whereas nimble and quick turning trucks are preferred with more lean and for tricks.
The breadth and turning radius of your board are directly correlated to the size of your truck.

You should also know that before purchasing longboard trucks, the size of the truck is very important in determining speed.

 

Which Way Should Trucks Face on A Longboard?

If you’re a longboarder, you can choose whether your trucks are facing forward or backward when you ride.

Although there are many aspects to consider, it is best left up to the individual user to decide what works best for them.

For example, some skateboarders like to face their trucks backward, which makes the board stiffer, for more stability at high speeds.

Conversely, a board with forward-facing trucks will be more maneuverable, but it will also be unsteady at high speeds because of its low lean angle.

Beyond all that, there isn’t a single way to go about figuring out what to put at the top of your list of priorities.

If it makes your riding more comfortable and enjoyable, then by all means go for it. There are a slew of variables at play here.

How Should Trucks Be Placed on A Longboard?

I’m not sure how to answer this, but I’d suggest that the location of trucks shouldn’t have a significant impact on your riding.

In order to ride at higher speeds, it’s best to have your board’s front facing forward. This will keep you more stable no matter how fast you’re going.

To make things even easier to maneuver around corners, it’s always preferable to have trucks in the front and back of the vehicle rather than simply one.

 

Do Longboard Trucks Make Your Board Faster?

They aren’t really necessary, but they can help you go over tough terrain faster because they keep your speed constant during the voyage, which makes it more stable at high speeds.

In the event that you wish to keep your balance while riding at high speeds, longboard trucks are an excellent option.

 

What Are Double Kingpin Trucks Good For?

Trucks with two kingpins are an excellent choice for new riders since they make the ride much more stable.

Drivers prefer two kingpin trucks over normal ones because of the ease with which they can steer at slower speeds due to the driver’s proximity to the board’s deck.

All of this is further enhanced by the fact that these trucks have a wider turning radius, making it easier for you to turn bends.

Double kingpin trucks, on the other hand, are ideal for novices who are just beginning to ride and require a solid foundation before attempting more complex feats and tricks.

 

What Is More Important For Longboard Trucks?

Purchasing this type of equipment necessitates careful consideration of a slew of aspects, so do your research first.

Longboard trucks’ size and weight are the first things to look for when purchasing them since the lighter they are, the more maneuverable your board will be.

The material used to make them will also have an impact on your riding experience, so keep that in mind as well.

These additional considerations include affordability, durability, quality of materials and stability, as well as an improved riding experience.

Seemore: what length of longboard should I get?

Which Bearings Are Good For Longboard Trucks?

Abec 7 bearings are just one of several types of bearings available for purchase in the market today.

These bearings are a great fit for your longboard because skaters and boarders are increasingly using them.

ABEC 5 bearings, on the other hand, are significantly less expensive but will not last as long as Abec 7 bearings.

While some individuals prefer to use just one bearing per truck, others prefer to use four different ones.

Although Abec 7 bearings are less expensive, they’ll still give you good speeds, therefore I’d recommend them over the more expensive ones.

Conclusion

Is it possible to use longboard trucks on a skateboard?

Technically you can use skateboard trucks on long boards, so there’s nothing stopping you.

However, this does not imply that you should use them on a longboard because they are simply too little.

Additionally, skateboard trucks aren’t designed for longboarding activities such as cruising and tricking around.

Aside from that, smaller trucks make your longboard more unstable, increasing the risk of breaking an arm, jaw, or any other part of your body when riding..

If you’re going to use skateboard trucks on a long board, I strongly recommend that you do it at your own risk.

A helmet will make your rides more enjoyable and lower the risk of injury, providing you ride safely.

 

2ohm or 4ohm subwoofer

What’s better, a 2ohm or 4ohm subwoofer?

 

We get a lot of questions about whether a 2 or 4 ohm subwoofer is better.

For starters, what is the difference between a 2ohm and a 4ohm subwoofer when trying to answer that question?

There are only a few key differences between the two, and those are: • The price.

In terms of how much resistance one might expect to face.

For example, you need to know how much power your subs can handle.

dB (logarithmic unit of acoustics measurement) they are able to produce.

2ohm

To determine how much power a subwoofer can handle and how much power it can convert into sound, you’ll look at the ohm, the SI measure of electrical resistance.

As a rule of thumb, 2ohm subwoofers create a louder sound than 4ohm subwoofers because of their lower electrical resistance.

A louder subwoofer isn’t necessarily a better subwoofer because of its higher power consumption, 2 ohm subs.

4ohm

If you’re looking for a subwoofer that will last a long time, you’ll want to go for a sub that has a higher electrical resistance.

The 2 ohm models, on the other hand, are louder.

However, the sound produced is more compact, thus the sound you hear from it is of a considerably higher quality than the 2ohm subwoofers, but not so much as to be noticeable.

The price of a subwoofer can range from $20 to $180, depending on the type you choose.

What’s better, a 2ohm or 4ohm subwoofer?

In terms of pricing, the two subwoofers are vastly different. However, this also relies on the brand and size of the subwoofers you select.

For the same quality, a 2 ohm subwoofer might cost anywhere between $50 and $200, depending on the manufacturer.

Additionally, there is a variation of 2.5 decibels (dB) between subwoofers with 2 and 4 ohm impedance.

In terms of sound quality, 2 and 4 ohm subwoofers are nearly indistinguishable if run at the same wattage.

The values of watts and ohms are intertwined in mathematical formulas, so that when one changes, the other frequently does, too.

WoW Gold Making Guide For Low Level Players

WoW Gold Making Guide For Low Level Players

 

Making gold at a low level isn’t difficult, but you do have to put in some work. Each item in the game has a value, and you’ll need to figure out how much of a value.  If you just buy every item you can for your character’s level, you’ll be taking up a lot of space, and not making much gold at all.  Check out the charts below to see how much you need to farm each level range.

Remember that every item description will tell you if you can sell it, and if it can be turned into gold. If it says it cannot be sold to Alliance, you might as well sell it to Horde.

Horde

1-10:

At level 1, you want to make sure you pick up the Herbalism profession. Herbalism will be your main gathering profession, and it allows you to make gold quickly. Herbalism is easy to learn, doesn’t require any special equipment, and you can use it while you level.

You need to make sure you have the highest level profession that you can, at least as high as your character. This is because as you level up, you will heavily need herbs.

Alliance

1-10:

Dwarf’s and Gnome’s don’t have the Herbalism profession, but they do have eyes that can help you gather the different herbs.

Dwarf’s have Stone, Iron, and Dwarf inside of their belt buckles. If you use these items, you can gain a large amount of experience quickly.

You can sell these items to Human Rogues, who will pay a healthy amount of gold for the items.

atches from level 70-80 can also be sold to Human Rogues. They will pay more gold, because Human Rogues are the richest characters in the game!

Night Elf’s can sell Draenite to Gnomes (only worth about 5 gold for each), and high level Night Elves will pay Draenite to all their faction members.

Kobold’s can sell refined Iron to Gnomes and Kobold’s can sell Treyinx Crystals to all sorts of people.

Gnome’s can sell Flasks of Extractias to all sorts of people.

ZKid’s can sell volatile Flasks of Extractias to his faction (only worth about 30 silver) and high level ZKid’s can sell highly sought after recipes to every faction.

Other notes on selling your glyphs:

– You can buy seven glyphs of each for the price of one.

– You can buy up to ten of each, but can only have seven of each glyph.

– You can buy as many glyphs as you want.

– You do not have to turn them in to get them to your base for sale.

– You can sell unsold items to vendors.

– You can sell unstrategy items to Antigua.

Heirloom Items

Heirloom weapons and armor has been a great part of the game for WoW over the past few years. With the introduction of the Wrathe of the Lich King expansion, new types of heirloom are being introduced. These include the Arcanum of the Eternals, the plans from the Scarlet Crusade, and the Cube of the Elder Council.

The Eternals are being used to write about the Wrathe of the Lich King. Any Enchanter withstands the Voice of Enchanter ability can acquire the Eternals. Once acquired, these can be used with the Inscription profession to create greater magic spells for your character. The Cube of the Elder Council has been specially associated with the Wrathe of the Lich King, that is why it has its ownenei indenture.

The Scarlet Crusade

This faction is classified as the opponents of the Light.  Although they are not directly confronting the Alliance, they still pose a threat to the world because of their zeal to defeat the evil Scourge and the Lich King. Their leader is Argent Healer. They are considered as the legitimate wielders of the Jericho. They wield ps within its reaches. Argent Heal can restore the dead heroes to life after they are defeated by the Scourge. This character alone face the Lich King’ monsters.

Online Games

Online Games

 

Online games have become the best way to learn a given skill, or simply entertain oneself. Online games can be played as a solitaire, a multiple choice quiz, a multiplayer board game, or even a profit making MMMORPG. The best thing about these particular games is their accessibility. Anyone can log onto the internet and play a quick game while waiting for an appointment, or while traveling for work. laugh uncontrollably along with others when you are defeating enemies and overwhelming opponents, only to find success ere Downs. The best thing about these games is their minimal learning curve.

Learn to play an online game easily, fast and right from the beginning using a complete range of tutorials and interactive packages. Most of these games are created for novice and beginner players, so no matter what your skill level, you can enjoy these games and win.

Complete these games and pass your opponents, so that you can advance to more challenging levels created for advanced players. Play a game or two, and you will be able to develop and learn some important skills that can transfer to other skills and mottos. Take these games, seriously. Our modern world has made being successful in life and learning to play a positive event in one’s life. Developing your mind set and skillsets are great advantages of any game. These mind sets and skillsets can translate to actual life and either here or there.

Winning at online games, besides having fun, helps relieve stress, defuse anger, and improve concentration and memory. These games also provide the opportunity for team playing and activities that don’t focus on individuals. Games give the opportunity for social interaction while playing as opponents try to defeat each other, as well as the opportunity to work with, and learn from each other.

Some examples of fun games:

Team base and Defend the base are two exciting army-based flash matches. Team base attackers need to protect their team’s base (Nexus) from being captured by the enemy or be crucial in its victory. Defend the base is much the same as Team base with one key difference. The game’s objective is to prevent the enemy from respawning or continuing to capture the Nexus.

Escape

Escape is a fun sci-fi game. Escape from theury is to search for an escape pod, land on a ship and upload and dissolve the pod. Your piece is to connect to the next structure. There are numerous escape pods, and you must defuse them to release the pod. You are able to change the piece before each round. The longer you defuse the pod, the more points you get. You can even give the opposing team more to use in the next round.

Zombies

Zombies mode is a popular mode stocked with frantic action and elements to the high roller. In Zombies mode, one goal is to survive as you battle and kill all the zombies that you encounter. You are able to increase your score and acquire powerful weapons.

Siege

Siege mode is another mode for quick, intense action along with elements of survival. In Siege mode, you will need to reach the gate and protect it at all costs. You may not alone survive in this mode. You must also protect the gate from being breached.

There are several game-play modes to hone your competitive spirit. Whether you are engaging in a classic Capture-the-Flag scenario, attempting to defend your team’s flag, or trying to reclaim your opponent’s captured flag; there are numerous modes to enjoy.

Co-op and team-based modes let you work together with a friend to achieve your common goal. Team-based mode adds a sense of Nation, as you and your friend’s objective may be the same – to survive until a certain point in the mission.

Eye of the Storm:

This is a seven-a-side first person shooter location with a mix of team-based and free-for-all game-play. Each team is battling for the ball and for control of the center. Use your skills and wit to make your team’s goal more difficult to achieve.

Mythic EA Battlerequires you to use real-world weapons together with characters from the popular EA role-playing games. EA has developed eight characters specifically for the game: three from each of the two rival factions, the Elves and the Dwarves. They are legends in their own right and even wear armor, fed up of putting up With their skills, you can also command armies against your friends.

You can build your own unique character and proceed to one of three Hyper Classes. Your character can also enhance his/her stats and abilities by selecting Football IQ, Stamina and Intelligence. Team up with your best friend and use your combined skills to win the game.

There are loads of other excellent sports games available also. Stay updated by reading the latest updates on the Internet.

Related: