Blown Speaker Repair Cost

There are many reasons why a speaker might blow. If it’s installed right, there should be no reason for something like this to happen.

But small problems in the electrical system can cause big problems. With a little education, you can avoid having to pay to fix blown speakers and also learn how to get the most out of your set.

So, what are the reasons behind this problem and what is the repair cost?

Speakers may blow for many different reasons. Most of the time, there are two causes: thermal failure or mechanical failure. But each of them can be stopped.

If you don’t do this, the cost to fix a blown speaker could be very different depending on the model. They can be inexpensive or very expensive.

How To Tell If You Have A Blown Speaker

When you talk to an expert, a “blown speaker” is usually one that has been severely damaged. Sometimes the speaker still works, but it sounds so bad that you don’t want to turn it on. Most of the time, it won’t work at all.

Most of the time, if you break your car speaker, you won’t be able to hear anything. There is also a chance that you will only hear a buzzing sound.

There are more things that can go wrong with a speaker. It might not even be blown, which is why you need to check it properly before you decide to replace it.

 

Factors That Can Blow Speakers

As a general rule, there are two things that can cause speakers to blow. They can be blown either with heat or with a machine. If there is one way to avoid both problems, it is to not play music at too loud of a volume.

Why do mechanical things break?

The cone, which is an inside part, moves in the wrong direction. It moves forward anyway, but sometimes it moves much farther than it should, hurting the things around it. There will be permanent failure because parts will come loose or break.

Failures caused by heat are more complicated. They happen when a speaker gets too much power for it to handle. Inside the speakers, heat builds up. Everything will fall apart because the glue that holds the parts together will get soft.

At the same time, too much power will also damage the wiring inside the voice coil. When the voice coil is smoked in this way, there will be no sound at all, not even a buzzing or hissing.

In both cases, it’s clear that the equipment was used outside of its standards by accident.

If any of these things happen, the cost to fix a blown speaker will teach you something about how to take care of it.

Other Causes Than the Volume

More technical problems could blow your speakers. The same thing will happen with a system that wasn’t made by professionals, so don’t wing it or use random services to get things done.

The same is true for both physical damage and amps that are clipping.

Clipping happens more often when there are amplifiers in a system. The amp is being used past its limits, and the tops and bottoms of the waveform are being cut off. Because of this, speakers won’t be able to handle as much power as they say they can.

When it comes to physical damage, everything has to do with a bad installation. If the grill comes loose, put it back on as soon as possible. Cones are fragile, so this is to keep them safe.

Also, the cause may have nothing to do with anything but age. If your speakers are 14 years old, normal wear and tear could cause them to break. It’s just the way life works in these parts.

After all, OEM speakers aren’t always made of the best materials, especially when compared to high-end aftermarket models.

The cost to fix a blown speaker is pretty much the same no matter what caused it.

Since your speakers are gone, they will probably need to be replaced.

What To Do When Speakers Blow

Did your speakers blow?

From a technical point of view, a blown speaker can be fixed. It can be opened and taken apart into small pieces. Faulty parts can then be bought separately and replaced.

Does it make sense? Most of the time, no.

Most of the time, the cost to fix a blown speaker is more than the cost of a new speaker and the labor to install it. There are, of course, a few things that are different.

If you are tech-savvy and like fixing things, you can learn how to fix a broken amp and do it yourself. It can take a lot of time and be frustrating.

For example, if the speaker cone has a small dent, it can be fixed with a little bit of work. Just be careful when you’re working with delicate parts. There’s a good chance that the sound quality will be worse when you’re done, but the speaker will still work and make a good sound.

Plus, you can save a lot of money and feel good about doing it yourself.

If your voice coils are blown, the cost to fix your blown speaker will probably be higher.

It might be hard to find these parts separately, so you might need to buy used speakers and take their parts off instead. Then you’ll have a lot of spare parts. But it can be expensive to pay someone else to do it.

Most people, though, will choose to get a new one.

Choose the right kind of speaker when you need new ones. Find out why this is happening as well.

If you use an aftermarket system, you need to make sure that all of the parts work well together. On the other hand, it’s easier to use a stock system because direct-fit units make it easy to replace broken parts.

As long as you turn down the volume and avoid distortions, you should be fine.

​Conclusion

In short, the cost to fix a blown speaker is very different from one case to the next.

If you don’t like fixing things yourself, your only choice is to hire a professional.

Fixing them costs more than buying new ones, so the best thing to do would be to buy a new system and pay someone to put it in. If you like to do things on your own, you have more choices. ​